Відео

Is there a guide to build it how would I learn how to make my own

The center click does not have a purpose and should not be there. Read the manual don’t read the manual, whatever. That is an easily mistake, unsafe condition that should not exist on the gun.

Thank you for this review and information. I purchased one from AIM Surplus and am very pleased with it. The information that you provided in your video was spectacular and really interesting and informative. I would like to respond to your comments on the white dot rear sights. Just to let you know, I can see indents in the center of the white dots but they remained intact unlike yours which had a black hole in the center. Mine are solid but I do like the way that yours turned out. Thanks again for your very informative review.

Thanks for reviewing it. Not too much info out there.

I have the original " made in jugoslavija " you have the " made in poland " example

I have bought one great price for a firearm very simple for anyone looking for a gun

Is there 20 round mag?

Doing the Lord's work for putting the Wolf A1/T91 videos because there is nothing online to help haha.

If you like thin grips, the stock plastic grips are the thinnest. Am I wrong?

Thanks for the video. Out of frustration, I was using my APX slide as a paperweight for a while. I finally put it back together last night, and used your video to make sure that I did it correctly. By the way, I absolutely hated the first Gen slide, but for the price I paid, I got used to it. LOL! Edit: Put it back together and the trigger didn’t work. I found out that the spring that goes over the rear spring was in the right position, but didn’t have enough tension on it. Took it back apart (it gets easier), put a little tension on the spring, and it works just fine.

You can take it out off the jig as many times as you want, When you want to drill the holes you need to tape or use screws to shut the jig where it’s open if it’s not perfectly closed. You can use a handheld drill or a Drill press using a dremel. Handheld drill you have to make sure your going perfectly straight down i use a dresser a put the battery up against it and drill straight down vs holding it in the air. NEVER take out more polymer after drilling the holes The rails are cheaper then the frame !! You can’t always take out material but never but material back ! I’ve built 15+ Of these and perfect everytime polished internals sanded evenly frame rails Etc ! Marine Gun builder is one of the best P80 Builders Along with some others i can’t think of

i inherited my great grandfather's type 99 arisaka. he only put 20 rounds through it. operates beautifully. ive been on the quest to find a clip of similar material to use with it because i want to use it as it was intended. ill look into victory arms. at the moment i reload my own ammo but i definitely want to find some at a decent price too.

The four digit marking does in fact denote the manuf date. And the mark under the ejection port is a LE marking. I just got one of these about 3 weeks ago. I like it.

Not as difficult as other channels made it out to be. Really all you need is a punch, pick, and small hammer and its done in 15 minutes. I also put on an FDE frame and it looks great. Thanks for the help!

It is good ammo and works well. But, I usually use steel case. Ak and sks weapons were designed for steel in mind.

On the right side of the apx underneath the ejection port, it also can say "ascensus". Minus the quotation marks of course.

I thought the first 9mm Beretta ever made was the Beretta 1934.

I will NEVER order anything from AIm again. They burned me on a 1201 a few ago!

طاب نهارك قناة ممتعه

Correction, you can hit that middle safty spot with it chambered, and that is not safe. After decock is when you can't find that middle place.

2 things. I'm holding an 85F in my hands that I just inherited from my father. You can't put the safty in that middle position with a round chambered. That is just telling you it's not chambered, so it doesn't need to be put on safty. Second, I am very concerned that your gun will fire cycle with the mag out. I owned an 84FS years ago and as said, just acquired this 85F. Neither would cycle with the mag out. I would have a gunsmith look at that. Aside from that, they are great guns and at $400 you got that at an incredible price. Oh, just saw that this was done 7 years ago. They sell for a LOT more today. Great review and I love the fact you had other models on hand for comparison.

الطبيعه.دائماً جميله

I got an aim surplus APX as well, and I love it. Mine also has those black marks on the sights.

Metal trigger?

Did you drill the pins in from both sides according to instructions. I think that you drilled it all the way thru on one side.

I’m on the fence of buying the 26 model, but scared I’m going to screw it up.

Beautiful sunset over the Ocean footage. Video Like 👍

People who think these are hard to work on are pansies.

On the A1 the loaded chamber indicator is on the extractor.

Just bought 400 rounds for 220, ~.77 cents/ round. cant believe people were picking this stuff up for 18 cents/round 10 years ago

يوغسلافي مبدعه بصناعه الأسلحه الشخصيه

ياخبير بأي سنه تم صنع هذا المسدس وهل هو يوغسلافي بحت

كيف الحال ياخبير هل هذا المسدس من عيار 9 ملم

I just bought one

طاب نهارك خبير ماهو رأيك بجوده توكاريف m57 هل هيه جوده 100 %

بيريتا جمال وقوه

سؤال لحضرتك هل مطرقة مسدس توكاريف m 57 هل تتعرض للكسر أو السوفان

عفواً باغه جميله من صناعه جمهورية يوغوسلافيا الاشتراكية الاتحادية أنا أحب توكاريف m 57

the gun is excellent. from 15 meters in a circle of 7 cm. i could pack 1000 rounds

Mausher

Remington 870 Serial Number receiver Prefix Codes. Your letters on this receiver the first and last are 'XM' means your receiver was made in X 1990. M 12 GA. MAGNUM (3”). your barrel matches your receiver. 1950 - 1967 No Prefix 1968 - 1973 "S" Prefix 1974 - 1977 "T" Prefix 1978 - 1983 "V" Prefix 1984 - 1989 "W" Prefix 1990 "X" Prefix 1991 - 1993 "A" Prefix 1994 - 1996 "B" Prefix 1997 - 2000 "C" Prefix 2001 "D" Prefix REMINGTON SHOTGUN SERIAL NUMBER STRUCTURE M/870 LETTER PREFIX 1950 TO APPROX 1968: NO SERIAL NUMBER PREFIX 1968 TO PRESENT: LETTERS USED (IN SEQUENCE) S-68, T-74, V-78, W-84, X-90, A-91, B-94, C-97, D-01, AB-05 LETTER SUFFIX (DESIGNATES GAUGE) V 12 GA. (2 3/4”) M 12 GA. MAGNUM (3”) A 12 GA. “SUPER” MAGNUM (3 ½”) W 16 GA. ( 2 ¾” ) X 20 GA. “HEAVY FRAME” (DISCONTINUED) N 20 GA. “HEAVY FRAME MAGNUM” (DISCONTINUED) K 20 GA. “LIGHT WEIGHT” (“LW”) (ALSO INCLUDES M/1100 “LT”) U 20 GA. LW MAGNUM (ALSO INCLUDES M/1100 “LT”) J 28 GA. H .410 BORE (2 ½” OR 3”)

Sanded down the metal exit groove on 20rounder with 800 grit sandpaper wrapped a round chopstick (or something round and right size) and now it works as it should. Just push down the red follower with another chopstick while you sanding. And watch the angle. Don’t take off too much of the material. At least you have to take off the paint that 20rounders sold as. 10rounders are sold with polished exit groove if you didn’t notice.

Yep, i love mine, too. It surprised me that they feel softer shooting than the Mosin....at least to me. Great guns.

Mine say c308 sporter and it’s a POS !!! Smh it stays double feeding. So I’m have to try some new mag. I also bought a surplus bolt carrier for it. Hopefully that get it running.

They are practically giving those pistols away.

I was thinking Black Betty before you said it! Thanks for the info. What did you end up doing with this A1? Did you give in and clone it? I'm about to buy one and also have been torn between the barrel lengths but i was glad to learn about the barrel thickness as you addressed. You can see the tape in photos of the shorter lengths.

Funny im waiting on a century arms cetme c308 sporter and watched one of your videos on it and searching through your videos and come across this. I have one in my office. My message says Hopper is alive. P.s. you put your weed in there.. (SNL skit with Rob Snieder and David Spade)

سؤال لحضرتكم من الأفضل Tokarev;Roumain أو Tokarevجمهورية يوغوسلافيا الاشتراكية الاتحادية

They’re almost free… lol.

Wilson combat mags work great with it